0

Komet Tools

ViewView
  1. Face Mill Cutter Q40-Kfm

    Q40-KFM face-milling cutter Highly positive and soft-cutting   KOMET® Q40-KFM face-milling cutter with a cutting depth up to 4 mm. Suitable for precision and medium machining. The high-performance cutting materials BK6130 and BK2735 increase productivity in steel and cast iron machining.
    Send Inquiry
  2. Komet Face Milling Cutter Q56-Khf

    Q56-KHF face-milling cutter The KOMET® Q56-KHF face-milling cutter is extremely efficient. It has been designed for high-feed applications and achieves a very high metal removal rate. Its angled cutting edge also provides optimum surface quality.
    Send Inquiry
  3. Shoulder/Slot Milling Cutter

    hi.apQ shoulder/slot milling cutter A new generation of milling cutters for efficiently processing an extremely wide variety of tasks. The tools are equipped with highly positive APKT indexable inserts and are suitable for shoulder milling, trimming, grooving, inclined plunging and circular interpolation milling. Thanks to the wide range of the most varied main carriers, e.g. snap-on milling cutters, end milling cutters or screw-in cutters, virtually every machining situation can be mastered. Added to this is the large selection of cutting materials and coatings which increase your productivity.
    Send Inquiry
  4. Spherical Cutter For Universal Use

    spherical cutter for universal use Weight 0.39 lbs Dimensions 4.13 × 0.47 × 0.47 in Shank Diameter 12mm Overall Length 105mm Flutes 4 Flute Cutting Diameter 12mm Cutting Length 30mm Material To Be Cut General Metalworking Tool Type Endmill Units Metric Radius 6mm Tool Material Carbide Tool Style Spherical, Universal
    Send Inquiry
  5. Copy milling cutter Q55-KCM

    Q55-KCM copy-milling cutter The KOMET® Q55-KCM copy-milling cutter is suitable for an extremely wide variety of milling tasks and allows for high feed rates combined with maximum stability. Thanks to the use of further indexable insert shapes such as Q43-SDMX, Q47-EOMT or Q55 circular inserts with wiper geometry on the same basic body, this milling cutter system is an all-rounder as far as machining options are concerned. The KOMET® Q55-KCM can therefore be used for chamfer milling and equally well as a high feed-rate milling cutter. Tipped with circular wiper inserts, it ensures particularly good surface quality.
    Send Inquiry
  6. APKT 1003PDTR-RM GRADE IC328

    APKT 1003PDTR-RM Grade IC328 - Helimill Insert APKT 1003PDTR-RM Grade IC328 - Helimill Insert*Product images may differ from actual purchased item.FTS-EH5601371 APKT 1003PD(T) R-RM REINFORCED Technical Specifications:IC: .263 Radius: .019 Type: APKT Grade: IC328
    Send Inquiry
  7. Ball Milling Cutter

    BALL NOSE MILLING CUTTER / SOLID / FOR HARDENED STEEL / TAPER JEL F.KOMET JEL Solid carbide milling cutter The new solid carbide shank milling cutter range provides tools to meet all demands in the 3.0 - 25.0 mm diameter range. They are used in cast iron and steel materials; soft and hard machining (up to 65 HRC); and in mould and die making. The product range is completed with tools for aluminium and non-ferrous metal working.Benefits for you:Comprehensive standard range from stock High productivity due to the perfectly tuned grade profile and coating for all of the workpiece materials Original regrinding service and recoating service is guaranteed by a comprehensive network of professional KOMET SERVICE partnersLINE F942 XH
    Send Inquiry
  8. Indexable Insert Drill Bit/Multi Purpose/Carbide

    INDEXABLE INSERT DRILL BIT / MULTI-PURPOSE / CARBIDE Description The KOMET KUB Pentron was developed for continuous solid drilling up to 6D, even in extreme machining situations which were previously only possible in 3D. This solid drill combines key features such as achievable accuracies, peak performance parameters and large drilling depths in one tool.KOMET KUB Pentron 26.0 mm available at Q1/2018 BENEFITS TO YOU Maximum performance and service life with outstanding drilling performance thanks to optimum main body stability and special surface treatment Excellent dimensional accuracy in extremely difficult drilling conditions up to 6DCost-effective stocking and easy handling thanks to identical internal and external indexable inserts Maximum tool edge life through four usable cutting edges of modern substrates with matching coatings Optimum swarf removal
    Send Inquiry
  9. High Perfomance Drill Specially Designed For Aluminium

    High-performance drills specially designed for aluminium SPECIFICATION:-The KOMET KUB Drillmax ALU is designed for machining aluminium and has optimised cutting edge and flute geometry. The drill is optimally centred and guided by the additional lands, which guarantees a high degree of alignment accuracy. The flutes have been additionally polished, which provides reliable chip removal from the hole.
    Send Inquiry
  10. Solid Carbide Spot Drill

    SOLID CARBIDE SPOT DRILL For countersinking, deburring and centring NC spot drills are self-centring and thereby perfectly suited to pre-machining bores with exact positioning. The coordinated tip angle means that this tool can also be used for countersinking and deburring.VERSION Tip angle: 90° | 120° | 142°Shank shape: HA/HE
    Send Inquiry
  11. Fine Boring Tool

    FINE BORING BAR The technically sophisticated product series KOMET MicroKom® and KomTronic® stand out for their particular performance capability and flexibility. They therefore come up to the highest requirements in terms of precision, concentricity and replacement accuracy. The modularity, a wide range of the latest cutting materials and high-performance coatings complete the series for all requirements in fine boring machining.
    Send Inquiry
  12. Komet indexable insert w29 42000.04 right left k10

    komet indexable insert w29 42000.04 right left k10 UNISIX indexable insert WOEX K10 for turning For right-/left-handed external and internal turning and facing ISO name: W29 42000.04..Rake angle: 12 Degree Thickness of indexable insert: 4.8 mm Knife edge length: 7.9 mm Radius: 0.4 mm
    Send Inquiry
  13. Komet Adaptor

    komet adaptor Material Stainless Steel Color Silver Surface Finish Polished Komet Adapters As the interface between the tool and the machine, adapters have a great influence on the result and the economy of the complete machining process. KOMET tool adapters offer a comprehensive range for every requirement.
    Send Inquiry
  14. Komet Carbide Drill Insert Woex 06T304-13Bk 8425

    KOMET Carbide Drill Insert WOEX 06T304-13 BK8425 Brand Komet Material Carbide Insert Style WOEX Insert Size 06T304 Grade BK8425 Product Number W29 34130.048425
    Send Inquiry
  15. Adaptor Claming Vibratin Dampened Fine Boring Bar

    adaptor claming vibration dampened fine boring bar order dia dia D1 dia D2 L L1 M05 90200 6 31 - 16 - M05 90200 8 31 - 16 - M05 90220 10 31 46 15 25 M05 90230 12 31 46 15 25 M05 90240 16 31 46 20 30
    Send Inquiry
  16. Komet Microkom Hi.Flex M05 01000

    KOMET MICROKOM HI.FLEX M05 01000 ABS*50 dia D order no claming screw insert on 5-70 m05 90300 N0056101 w57 14140.0460
    Send Inquiry
  17. komet b30 14020 abs*50 ff70

    KOMET® micro-adjustable drilling head B301 158 mm Description Version:With ABS® connection B301 and accepts M302 precision turning cartridge.The smallest adjustment is 0.002 mm on the ⌀ using the vernier. Central coolant supply to the cutting edge.Application:For bores from ⌀ 29.5 to 199 mm.For high precision setting, turning cartridge can be adjusted after clamping.Note:Please order the suitable precision cartridge No. 238310 (M302) and indexable inserts (see group 26) separately.
    Send Inquiry
  18. Iso Indexable Insert

    ISO INDEXABLE INSERT KOMET® ISO indexable inserts offer users a full range for counterboring, precision drilling and turning operations. State-of-the-art, ultra-hard cutting tool material technology allows you to maximise the productivity of your insert seat. Try it for yourself.
    Send Inquiry
  19. Shell End Mill

    SHELL-END MILLING CUTTER / INDEXABLE INSERT / FACE / FOR CAST IRON Description If you would like to have a trustworthy step and face crushing of cast iron substances, then hi.aeQ arbor face milling cutter is an ideal choice as it is innovative in design and offers excellent performance. It features many high teeth and low cutting forces. The Q80 divergent indexable inserts employed are intended for offset-boring and crushing operations. Owing to a standing-lying array, every insert is designed with eight working cutting edges. The highly firm divergent indexable inserts, when pooled with the chosen cutting tool substances and coverings, offer a huge cost-effective benefit while milling cast iron substances. NEW Arbor is a face machining cutter with divergent indexable inserts through which you will be awarded high constancy for high engraving competence due to the application of divergent screw-fit Q80 indexable inserts. All the eight usable cutting edges are fixed in an alternatively standing and lying array due to indexable inserts. It consumes less current due to stumpy engraving forces and a low-shaking, silent milling feature lessens the loads of the spindle loads This idea assures very high process...
    Send Inquiry
  20. High Performance Drill For Deep Holes

    High-performance drill for deep holes With the new KOMET KUB® Drillmax XL, the expertise gained from developing many special solutions has been transferred to a standard tool range, which is available from stock for 20×D in diameters of 3.0 to 10.0 mm and for 30×D in diameters of 3.0 to 8.0 mm. The spiral-fluted deep-hole drills have four guide chamfers, ensuring good guidance.VARIANT 4 x guide chamfers Drill diameter:for 20×D: 3,00 – 10,0 mmfor 30×D: 3,00 – 8,00 mm Shank: DIN 6535 HA Coating: TiAlN Point angle: 140°Helix angle: 30°Internal coolant supply
    Send Inquiry
  21. Synchro Tapping Chuck

    KOMET JEL® JSF Synchro tapping chuck Modern CNC machines allow synchronous thread tapping without a compensating chuck, also called "rigid tapping". The backlash of the spindle causes stress to one side of the cut tap or form tap, respectively. This may result in a reduced tool life and lack of quality in the surface of the thread. KOMET JEL synchro tapping chucks compensate for the length errors caused by the backlash and create the prerequisites for achieving optimum performance from your tapping tools.
    Send Inquiry
  22. Slide Measurement System

    Slide Measurement system Produce turning contours economically when working with a stationary workpiece Facing heads with direct encoder on the slide KomTronic® systems for spindle integration with own drive Based on decades of experience producing facing heads for special purpose machines, KOMET® is expanding its product range to include KomTronic® systems for spindle integration for different installation and usage requirements for facing heads.
    Send Inquiry
  23. Komet W83.32000 1561 Bk 61 Carbide Drilling Insert

    Komet W83 32000.1561 BK61 Carbide Drilling Inserts StyleSOEXCorner Radius (mm)0.08Product CodeW83 32000.1561Coating MaterialCVD-TiC-Al2O3Insert Size32Coating TypeCVDInner Circumference (IC) (mm)9.52MaterialCarbideSub-brandW83..13 InsertsShapeSquareInner Circumference (IC) (in)0.375GradeBK61
    Send Inquiry
  24. Pcd And Cvd -D Indexable Insert

    PCD AND CVD-D INDEXABLE INSERT To make its varied range of tools with ultra-hard cutting materials even more productive, the KOMET GROUP is increasingly relying on modern laser systems for machining PCD and CVD-D indexable inserts with maximum precision.
    Send Inquiry
  25. KOMET SOEX 050204 01 BK 8425

    KOMET SOEX 050204 01 BK8425 combininhg an innovative design and the special geometry of their indexable insert.
    Send Inquiry
  26. Synchro tapping chuck with HSK-A adaptor iso 12164-1

    Synchro tapping chuck with HSK-A adaptor ISO 12164-1 M4 – M12 63 34 4,5 - 11,2 95,5 69,5 29-42 0,98 50795126002000 50795226002000 50795326002000 ER20 160 134 1,40 50796126002000 50796226002000 50796326002000 M4 – M20 63 50 4,5 - 18 109 83 31-45 1,48 50795126003200 50795226003200 50795326003200 ER32 M4 – M12 100 34 4,5 - 11,2 102 73 29-42 2,40 50795128002000 50795228002000 50795328002000 ER20 M8 – M20 100 50 6 - 18 115,5 86,5 31-45 2,90 50795128003200 50795228003200 50795328003200 ER32
    Send Inquiry
  27. Boring Iondexable Cutting Insert /Milling/For Face Milling Cutter Q80-Lngu

    BORING INDEXABLE CUTTING INSERT / MILLING / FOR FACE MILLING CUTTER Q80-LNGU Description Q80 – LNGUCounterboring toolsFace milling cutter Q80-KFM, Multifunctional in special toolsEight usable cutting edgesSetting angle 88°Extremely stable for maximum productivity
    Send Inquiry
  28. Indexable Inserts

    With the help of our team of technical professionals, we are involved in offering optimum quality Indexable Inserts. This range is designed for multi-spindle tapping applications and is used in conjunction with the WES-WE adaptors. The system is designed for rapid and easy adaptor change, which is automatically locked by insertion into the chuck. It is a perfect choice for vehicles with carburettor or injection engine. This is also commonly used on cutting tools and indexable inserts. In addition, this Indexable Inserts is widely demanded for its robust structure and long service life.Features:Easy to install Durable finish standards Rust resistance
    Send Inquiry
  29. KOMET Indexable Boring Bar 0.6260″ ABS 32 KFK 1UJ 16R U4 B0025650

    KOMET Indexable Boring Bar 0.6260″ ABS 32 KFK 1UJ 16R U4 B0025650 Brand Komet Toolholder Style ABS-KFK-UJ Minimum Bore Diameter 0.626"Hand of Holder Right Hand Maximum Bore Depth 2.283"Shank Diameter 32mm Insert Compatibility TOGX.090204…Coolant Through No Product Number B0025650
    Send Inquiry
  30. End Milling Cutter HPC for Roughing

    End milling cutter hpc for roughing Description KOMET JEL® F.line F154 D HPC end milling cutterIdeal for: Structural steel/tool steel, grey cast ironAlso suitable for: Stainless steel, acid-resistant steel, high-temperature resistant steel, non-ferrous metalsSoft and hard machining up to 48 HRCCoating: AlCrNNumber of teeth: 4Shank: DIN 6535 HA, DIN 6535 HBDiameter: Ø 3–20 mm
    Send Inquiry
  31. Tungsten Carbide Cutter

    tungsten-carbide cutter Komet’s new H137E.104.060 tungsten-carbide E-Cutter with staggered toothing addresses the need for precision and efficiency when applying the Locator technique for implant-retained overdentures.With a 6 mm diameter, the instrument can be employed as an alternative to ball-shaped burs to quickly create a perfect-sized open circle for placement of the Locator housing. The instrument’s high number of offset blades with specially engineered E-toothing facilitates ergonomic work while cutting acrylic as well as plaster and dental alloys. The cutter is also ideal for extraoral chairside applications and for use in the dental laboratory.
    Send Inquiry
  32. Indexable Milling Cutter

    indexable milling insert Combining an innovative design and the special geometry of their indexable inserts, KOMET® milling cutters make a distinctive difference when machining an extremely wide variety of different materials. Using more than 70 indexable inserts with different topographies, substrates and coatings, which can be combined with a variety of 60 basic body designs, KOMET® provides a versatile, complete range of tools with which all types of milling – from face, shoulder and chamfer milling to milling straight, 45-degree and T-slots; circular and plunge milling, inclined plunge milling, and even free-form milling – can be mastered with optimum efficiency.
    Send Inquiry
  33. KOMET CARBIDE DRILL INSERT SOEX 050204-01 W83.13000

    KOMET Carbide Drill Insert SOEX 050204-01 W83 13000.0161 BK61 (10 Pack)Part Number W83 13000.0161 Number of Items 1 Brand Name Komet Item Weight 2.0 ounces Manufacturer Grade BK61 Material carbide Size 50204 Style SOEX
    Send Inquiry
  34. komet carbide turning insert w30

    KOMET Carbide Turning Insert W30 14060.0261 BK1 Brand Komet Material Carbide Grade BK1 Product Number W30 14060.0261
    Send Inquiry
  35. Replaceable Head Drills For Very Small Diameters

    Replaceable head drills for very small diameters The new replaceable head drill KOMET KUB K2® ensures simple and safe replacement of the double cutting, carbide drill heads, even in the machine. The replaceable head drill relies on the economy and flexibility advantages of replaceable cutters. The double-edged drill heads of hard metal are child’s play to change thanks to the patented self-clamping and self-centring connection.
    Send Inquiry
  36. KOMET U11 32223, 0.875", KUB Quatron, Cylindrical Shank Indexable Insert Drill,

    KOMET U11 32223, 0.875", KUB Quatron, Cylindrical Shank Indexable Insert Drill, 2xD, 1.000 x 3.250" Shank KOMET KUB Quatron® with its square inserts with four cutting edges on internal and external inserts, KOMET KUB Quatron® guarantees maximum tool life, high stability and economy.Features:High stability and economy thanks to equipment with square indexable inserts High process reliability Optimum swarf removal Outstanding drilling quality without withdrawal scoring Maximum service life As Easy Special stepped tools with different indexable inserts Cost-effective stocking and easy handling thanks to identical internal and external indexable inserts
    Send Inquiry
  37. Komet Thread Milling Tool With Deburring Edge

    Thread milling tool with deburring edge During the thread-milling operation itself, the  KOMET  JEL®  MKG  thread milling cutter with deburring cutting edge removes the otherwise uncompleted part at the start of the thread – without taking any extra time. This is particularly appreciated during work on hydraulic systems when, for reasons of maintenance, parts have to be fitted and removed relatively frequently. This uncompleted part is thereby prevented from becoming detached, entering the system and causing damage.
    Send Inquiry
  38. Solid Carbide Milling Cutter

    SOLID CARBIDE MILLING CUTTER / FACE / THREAD / DEBURRING Characteristics Construction:solid carbide Type:face, thread, deburring Other characteristics:high-precision, with cylindrical shank Diameter :Max.: 20 mm Min.: 0 mm Description The Komet Thread milling cutter GWF Tomill GP is a universal tool designed for maximum cutting speed and tool life. These spiral fluted solid carbide tools for spot facing, chamfering, and thread milling from 20.0mm diameter with a single tool, stand out for their high stability and smooth running feature.
    Send Inquiry
Contact Us

Shop No-56, Wing-B, Upper Ground Floor, Jai Ganesh Vision, Survey Number 171, Pune, Maharashtra, 411035, India
Phone :+918068095097